PEATY´S Rim Job Tubeless Tape 9 Meters Черный, 21 mm

Designed by pro riders, mechanics and scientists, Peaty’s Rim Job has been developed from the ground up as a bicycle rim tape. The super high tensile strength tape is primed with a bespoke adhesive which clings like s**t to a blanket, yet leaves a minimal mess when removed. An optimum amount of stretch and large rigid recyclable core allows the tape to be pulled and applied with tension, contouring your rim tightly for a better fit. Do you struggle to find the hole? No problem! Just hold your rim up to the light and the tape’s semi-transparent finish will illuminate the way. Our tape comes on 9meter and 50meter rolls in four different width options - 21mm, 25mm, 30mm and 35mm. Features:: - Remove tyre and any old rim tape - Clean and degrease rim thoroughly (nobody likes a dirty rim!) - Ensure rim is completely dry before application - Starting at least 10cm before the valve hole, Press the tape firmly into the centre of the rim and smooth out to the edges, removing any trapped air - Run tape around the rim while keeping tape tension and allowing for at least 10cm overlap of tape at the end when cut - Use a small spike to pierce the tape in the centre of the valve hole - Remove dust cap and push valve through the valve hole - Apply lock ring tightly by hand, ensuring there are no air gaps - Refit tyre, add Peaty’s Tubeless Sealant, inflate tyre - Ride! Specifications: One 9 meter roll will cover approximately: - 5x 26´´ Rims - 4x 27.5´´ Rims - 4x 29´´ Rims - 4x 700c rims