PNI PNI-ML200 200 cm antenna

CB PNI ML200 antenna, length 190cm, 26-28MHz, 1000W. The ideal choice of a CB antenna: - For the right choice of a CB antenna, the following aspects must be taken into account: the mounting method, the length of the antenna depending on the desired communication distance and the positioning of the antenna on your car or truck. the quality of the signal transmitted and received. The quality of CB PNI antennas is already known by the very low values of the SWR. Performance: Maximum applied power 1000 W The CB PNI ML200 antenna is known for its performance and technical characteristics, and can be calibrated to a SWR of less than 1.2: 1. The antenna length of 200 cm, the vertical polarization and the impedance of 50 Ohms offer a pleasant experience for any user of CB radio station. It can be used on a frequency range between 26 - 28 MHz, in extreme weather conditions, withstanding temperatures between -26 ° and + 60 °, this is due to the high quality materials used for its manufacture. The CB PNI ML200 antenna is built with great flexibility due to the spring at the base of the wire, but also to the material: stainless steel. Communication distance is another decisive factor in the acquisition and use of a CB antenna. PNI ML200 offers the possibility of a communication of up to 20 km in ideal working conditions: calibrated antenna, open field without obstacles, the station with the maximum power allowed by law and with a standard reception. Any obstacle such as: hills, mountains, buildings, walls can reduce this distance. A Single Cb Antenna: Multiple possibilities of use CB PNI ML200 antenna can be used either on a magnetic base (we recommend at least 145 mm, PNI 145 / PL) or on a fixed support. The CB antenna comes fully equipped for mounting on any kind of fixed support (we recommend PNI L1, PNI T941, PNI SPA100, SPA110, SPA120 or SPA130) on a car or truck. The package contains: RG58 cable with a length of 4 meters, PL259 plug for connection to the station, SO239 PL 16mm connector and rubber gasket. Specifications: General features: - Working frequency: 26 - 28 Mhz - Maximum power applied: 1000W - Minimum SWR in the center of the band: less than 1.2: 1 - Length: 200 cm - Impedance: 50 Ohm - Material: Stainless steel - Connector tip: PL - Hole diameter (mm): 16 mm - Cable length: 4m - Weight: 740 g - Size: 45 X 45 X 2000 mm - Polarization: vertically - Working distance: 20 km - Operating temperature: -26 ° C ~ + 60 ° C The package contains: - Radio station antenna: Yes - RG58 cable: 4m - PL259 plug: Yes - Antenna coupling plug: - SO239 connector: Yes